Hazardous Waste - ADS Recycling

If you have hazardous waste or asbestos which needs removing, then ADS Recycling can help you. ADS recycling don’t just specialise in equipment and skip hire. Some waste cannot be cleared like everyday household waste and needs special equipment or procedures to clear it safely and ADS Recycling can do this for you.

They have the skills to deal with the problems that are associated with the clearing of contaminated land. They will take and analyse samples of land within professional laboratory conditions and then dispose of it in accordance with special Waste Regulations 1996 & Environmental Protection (Duty of Care) Regulation 1990.

With asbestos waste, they will collect Asbestos from your site by using roll on roll off containers and chain list skip lorries which are then disposed of at licensed landfall sites. All asbestos must double bagged in weather proof heavy duty plastic and labelled on each bag to ensure a safe and secure removal. This procedure is carried out in accordance with the Special Waste Regulations 1996. All removed waste is issued with an Environmental Agency Consignment Note (section 62). ADS Recycling Limited offers an efficient and reliable Asbestos removal service that will solve your hazardous waste problems where your project is big or small.


If you need help clearing away hazardous or asbestos waste, then visit their website or contact ADS Recycling today.

JTFS Mini Micro6 from JT Pumps

JT pumps, a domestic and commercial pump supply company, have a wide range of sewage pumping systems available to purchase.

These sewage systems are available in a variety of sizes, with both single and twin sewage pumps handling. The domestic sewage pumping systems are designed for easy installation and arrived pre-assembled. They also comply with BS EN 12050-1:2001 / BS EN 7526:1998 standards.

This particular pump is a JTFS Mini Micro6. It is a domestic sewage system that is completely job ready in circumstances where there is no available gravity flow. This pump is suitable in conjunction with a variety of drainage applications. Due to this being a mini system, it can be used to transfer of sewage or waste water.

The pump also has some of the following features:
Cast iron / Stainless steel construction.
Full 50mm solids handling capacity.
Coolant filled motor.
Mechanical seal.
Non-clogging vortex impeller.
10 metres of cable.
Float switch as standard.
Single phase, 50Hz, 240 Volts
Norminal 0.37kW (0.5HP)
7m head

There is also the option of a high water alarm if required.  

For more information about JT Pumps head to the website: http://www.jtpumps.co.uk